Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, Руководство пользователя

Страница: 437 / 472

If the Max Facet Deviation is set to 0, then this function is ignored.
Representation Detail Specifies the level of visual representation of IFC elements.
IFC elements can have multiple visual representations, such as bounding boxes (simplest), lines, styled lines,
polygons, and styled polygons (most complex). Loading and showing all of these representations can lead to
cluttered visuals and memory overheads.
Select from the following options:
■ Highest Only - to load and show the most complex level of detail available while ignoring simpler ones.
■ Show Highest - to load all representations, but only show the highest level of detail available.
■ Show All - to load and show everything available.
Show Spatial Hierarchy Select this check box to show IFC model as a tree structure in the Selection Tree.
Clear this check box to show IFC model as a simple list of elements in the Selection Tree.
Use Property-Based Colors Select this check box to converts and use property-based colors.
TIP If an IFC file is predominantly black when loaded, clear this check box to revert back to using IFC-standard colors.
See also:
■ “ IFC File Reader ” on page 99
IGES Page
Use this page to adjust the options for the IGES file reader.
Faceting Factor Enter the required value to control the level of faceting that takes place.
The faceting factor must be greater or equal to 0, where 0 results in the faceting factor being turned off. The
default value is 1. To get twice the number of facets, double the value. To get half as many facets, halve the value.
Larger faceting factors result in more polygons to a model and larger Autodesk Navisworks files.
Max Facet Deviation This setting controls the greatest distance between the edge of a facet and the actual
geometry.
If this distance is greater than the Max Facet Deviation value, Autodesk Navisworks adds more facets.
If the Max Facet Deviation is set to 0, then this function is ignored.
See also:
■ “ IGES File Reader ” on page 99
Inventor Page
Use this page to adjust the options for the Inventor file reader.
Active Project Specifies the path of the current Inventor project.
See also:
■ “ Inventor File Reader ” on page 100
JTOpen Page
Use this page to adjust the options for the JTOpen file reader.
Faceting Factor Enter the required value to control the level of faceting that takes place.
File Readers Node | 425