Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, Руководство пользователя

Страница: 424 / 472

When you modify default viewpoint settings, your changes do not affect the currently opened Autodesk
Navisworks file. They are used as soon as you open a new Autodesk Navisworks file, or start a new Autodesk
Navisworks session.
Save Hide/Required Attributes Select this check box to save viewpoints with hidden/required markup information
about objects in your model. When you use a viewpoint again, the hidden/required markups set when the
viewpoint was saved are reapplied.
By default, this check box is clear, as saving the state information with each viewpoint requires a relatively large
amount of memory.
Override Material Select this check box to save viewpoints with material override information. When you use
a viewpoint again, the material overrides set when the viewpoint was saved are reapplied.
By default, this check box is clear, as saving the state information with each viewpoint requires a relatively large
amount of memory.
Override Linear Speed By default, the linear navigation speed is directly related to the size of your model. Select
this check box, if you want to set a specific navigation speed manually.
Default Linear Speed Specifies the default linear speed value.
Default Angular Speed Specifies the default speed at which the camera turns.
Collision
Settings Opens the Default Collision dialog box where you can adjust the collision, gravity, crouching and third
person view settings.
Hyperlinks Page
Use the options on this page to customize the way hyperlinks are displayed in the Scene View.
TIP If you want to restore the default values, click the Defaults button.
In 3D Indicates whether the hyperlink icons are drawn in 3D in the Scene View.
Select this box if you want the hyperlink items to float in 3D space just in front of their attachment points to
the geometry.
If the hyperlink items become obscured by other geometry, clear this check box to draw the hyperlink icons in
2D over the top of geometry.
Max Icons Specifies the maximum number of icons to draw in the Scene View.
Hide Colliding Icons Select this check box to hide the hyperlink icons that appear overlapped in the Scene
View.
Cull Radius Specifies how close to the camera hyperlinks have to be before they are drawn in the Scene View.
Any hyperlinks further away than this distance are not drawn. The default value of 0 means that all hyperlinks
are drawn.
X Leader Offset, Y Leader Offset Hyperlinks can be drawn with leader lines (arrows) pointing to the attachment
point on the geometry that the hyperlink is attached to. Enter the X- and Y- values to specify the number of
pixels to the right and up that these leader lines use.
Standard Categories Page
Use the settings on this page to switch the displaying of hyperlinks based on their categories.
Hyperlink
Icon Type Specifies how to display this hyperlink category.
Select one of the following options:
■ Icon - hyperlinks are represented by default icons and in the Scene View.
412 | Chapter 17 Autodesk Navisworks Reference