Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, Руководство пользователя

Страница: 410 / 472

5 In the Clash Detective window, Results tab, select a clash in the Results list.
6 The simulation slider in the TimeLiner window is moved to the exact point at which the clash occurs. You
can move the slider to investigate the events happening immediately before and after the clash.
7 Repeat this process to review all found clashes.
Report Clash Results
You can produce various Clash Detective reports. For example, you may need a report that will enable planners
to adjust the project schedule in their 3rd party scheduling software.
For time-based clashes, it may be helpful to include in the report additional information about each static package
in the clash. This information can be set up in the Options Editor by using the Smart Tags definitions.
To create a clash report
1 In the Clash Detective window, run the desired test (individually, or as a batch). If you run a batch test, on
the Batch tab, select the test you want to view the results for.
2 Click the Report tab.
3 In the For Clash Groups Include box, Include Clashes area, specify how to display the clash groups in your
report.
4 NOTE If your test does not contain any clash groups, this box is not available.
Choose from the following options:
■
Group Headers Only - your report will only include summaries of the clash group folders that you have
created.
An example of a report with group headers only
398 | Chapter 16 Locate and Manage Interferences