Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, Руководство пользователя

Страница: 394 / 472

Export Clash Tests
Tests can be set up to clash items based on generic properties, including direct property selection on the The
Left and Right Panes of the Select tab, or using pre-defined Search Sets.
For example, you may have saved a Search Set that finds all pipes of a specific size, named "100mm Pipes". Your
test then clashes all 100mm pipes against the entire model. Exporting this clash test enables you to import it
into another model, which will automatically set up a clash test between 100mm pipes and the entire model.
NOTE Any clash tests that are based on explicit selections will not be exported. For example, clashing one layer against
another is not a valid test for exporting. To achieve this, use the Find Items dialog box (SHIFT+ F3) to search for each
layer based on a specific property (for example: Item, Name). These searches can then be saved as Search Sets, and
finally selected on
The Left and Right Panes in the Clash Detective window.
You can also select all loaded files on The Left and Right Panes and Clash Detective will treat this as selecting
the entire model.
Multiple generic tests can be set up as a batch and exported for use by other Autodesk Navisworks users, or by
yourself on other projects.
To export a clash test
1 Click File
➤
Export
➤
Clash Tests XML.
2 In the Export dialog box, enter a new file name and location, if you wish to change from those suggested.
382 | Chapter 16 Locate and Manage Interferences