Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, Руководство пользователя

Страница: 847 / 1638

Description Name
The operation of the window, as defined by the current IFC description (for example,
single_panel or triple_panel_horizontal). These values are case-insensitive, and un-
derscores are optional. (SINGLE_PANEL and SinglePanel are the same.) Operation
Window Instance Properties
Description Name
Constraints
The level on which the window is placed. Level
The height above the level for the window sill. This does not change the window
size. Sill Height
Identity Data
Specific comments about the window type. Comments
A label applied to the window; usually a numeric value. This value must be unique
for each window in a project. Revit Architecture warns you if the number is already Mark
used, but allows you to continue using it. (You can see the warning using the Review
Warnings tool.)
Phasing
The phase when the window was created. Phase Created
The phase when the window was demolished. Phase Demolished
Other
The height above the level for the top of the window. This does not change the
window size. Head Height
Model Lines
The Model Line tool creates model lines in the project. Model lines exist in 3D space and are visible in all
views.
You can sketch straight, curved, arc, circular, fillet, and tangent lines. For descriptions of the sketch tools,
see
Sketching on page 303.
Model Lines | 805