manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, Руководство пользователя

Поделиться
Скачать
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 Скачать руководство пользователя страница 404

6

Select Attached Details to load detail elements as attached detail groups.

7

Select levels to load levels into the group.

8

Select grids to load grids into the group.

9

Click OK.

The group is loaded into the project (or family), and the group file remains open.

Renaming a Group

1

In the Project Browser, right-click the group name and select Rename.

2

Enter a new name for the group, and press 

ENTER

.

Showing/Hiding Attached Detail Groups

1

In the drawing area, select a model group that has an attached detail group, or groups.

2

Click Modify Model Groups tab

 ➤ 

Group panel

 ➤ 

Attached Detail Groups.

3

In the Attached Detail Group Placement dialog, select or clear check boxes to show or hide the
attached detail group.

4

Click OK.

Detaching an Attached Detail Group from a Model Group

An attached detail group that does not include dimensions or tags can be detached from a model group.

1

In the drawing area, select an attached detail group.

2

Click Modify Attached Detail Groups tab

 ➤ 

Group panel

 ➤ 

Detach from Model Group.

Swapping Out Group Types

You can replace one group with another by selecting a group and then choosing a different group name in
the Type Selector. Revit Architecture automatically replaces the group.

When you swap an instance of a group type for an instance of a different group type, Revit Architecture
attempts to replace any attached detail groups from the old group instance with attached detail groups of
the same name from the new group instance. For elements in attached detail groups that were not replaced,
and for all other elements that depend on elements in the swapped group instance, Revit Architecture
attempts to find references within the new group instance. If new references cannot be found for these
dependent elements, Revit Architecture posts a warning to indicate which dependent elements it could not
find references for. In addition, the origin of the new group is placed at the position of the first group. For
more information on group origins, see 

Specifying the Position of a Group by its Origin

 on page 359

Specifying Height for Model Groups

1

In the drawing area, select a model group.

2

Click Modify Model Groups tab

 ➤ 

Element panel

 ➤ 

Element Properties.

3

Modify the instance parameters.

■

The Reference Level parameter sets the level the group is associated with.

■

The Origin Level Offset specifies a height above or below that level.

4

Click OK.

362 | Chapter 8   Editing Elements

Содержание 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды