Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Руководство по обучению, Страница: 82 / 332

This setting publishes each layer in your map to a separate layer in DWF.
In Design Review, you can turn the display of these layers on and off
independently.
11 Click OK to close the Publish Options dialog box.
12 In the Publish dialog box, click Publish (at the bottom of the window).
13 Specify a location and a name for the published file and click Select.
14 If you are prompted to save the sheet list, click No.
15 You might see a message telling you that the job is processing in the
background. Click OK to dismiss the message.
The files needed by Autodesk Design Review are published to the file you
specified. Monitor the progress of the publishing operation by holding
your cursor over the animated icon in the lower-right corner.
When the job is complete, a bubble appears in the bottom, right-hand
corner of the window. Click the link in the bubble to view any warnings
or errors. Close the window when you are done.
Where you are now
You have published your map to a DWF file, which can be displayed in
Autodesk Design Review.
To continue this tutorial, go to Lesson 9: Branch Out - Find Data Sources (page
74)
Lesson 9: Branch Out - Find Data Sources
As you go on to create your own maps, you can add data to enhance them.
For example, you can add surface rasters with elevation data for your area, or
generic vector symbols showing parks, hydrants, or other items.
The Autodesk geodata portal has access to multiple data providers. In this
lesson, you explore the geodata portal. Take a look at sample data provided
with AutoCAD Map 3D by the data providers who have partnered with
Autodesk.
74 | Chapter 2 Tutorial: Building a Map