Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Руководство по обучению, Страница: 206 / 332

2 Click the Plot And Publish tab.
3 Under Background Processing Options, clear the Publishing check box
for Enable Background Plot When.
4 Click OK.
To continue this tutorial, go to Exercise 3: Publish the map book to DWF
format (page 198).
Exercise 3: Publish the map book to DWF format
Save the map before you publish. You cannot publish to any format without
saving first.
NOTE This exercise uses the map you modified in the previous exercise (page
197).
To publish the map book to DWF format
1 Save the map.
2 On the Map Book tab of the Task Pane, right-click the map book name
(in this example, it is Default-ModelSpace) and click Publish To DWF.
3 Specify a name for the output file.
4 If prompted, choose a sheet set.
5 If you see the message that tells you the job is processing in the
background, click OK.
Notice the animated icon in the lower right corner of the window.
Place your cursor over
the animated icon to
see which page of the
map book is being
published.
198 | Chapter 5 Tutorial: Creating a Map Book With an Inset