Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Руководство по обучению, Страница: 105 / 332

Select only Delete Duplicates. Since Drawing Cleanup is most effective
when each action is run separately, you can create a separate profile
for each action you use regularly.
■ Click Add to add Delete Duplicates to the Selected Actions window.
■
Click Save.
5 In the Save Drawing Cleanup Profile dialog box, enter a folder and a
name for the profile.
For example, create a folder called DrawingCleanupProfiles and name this
profile DeleteDuplicates.dpf.
6 Click Save As and specify a name and location.
7 Click Finish.
8 If the Drawing Cleanup Errors dialog box is displayed, click Cancel.
To use a saved profile
1 Open the drawing to clean.
NOTE Do not use the drawing you used in the previous exercises. It has
already been corrected, so the loaded profile does not produce any further
results. If desired, replace that drawing with the original (uncorrected) sample
drawing from the installed tutorial sample data folder.
2 Click Tools tab
➤
Map Edit panel
➤
Clean Up.
3 In the Drawing Cleanup dialog box, click Load.
4 Select the profile and click Open.
5 In the Drawing Cleanup dialog box, click Finish.
6 Correct any errors.
Where you are now
You used the Drawing Cleanup option to remove duplicate lines and geometry
and undershoots. You created a profile for use with other drawings.
To continue this tutorial, go to Lesson 3: Add Drawing Objects to a Map (page
98).
Exercise 3: Use cleanup profiles (optional) | 97