Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK, Руководство по обучению, Страница: 103 / 332

6 In the Drawing Cleanup Errors dialog box, Delete Duplicates is
highlighted. Do the following:
■ Expand Extend Undershoots to see how many short objects were
detected.
■
With Extend Undershoots still highlighted, click Mark All to place
markers on all detected short objects.
The errors are not corrected, but they are marked. You can
find them later to review them more closely.
7 Zoom from within the Drawing Cleanup Errors dialog box to examine
errors without leaving the interactive drawing cleanup process. Do the
following:
■ Click Error 1 of 2.
■ Clear the Auto Zoom check box.
■ Under Zoom %, enter a higher value, such as 400. Click Zoom.
■ Click Next to zoom to Error 2 of 2.
■ When you are finished examining the errors, restore the Zoom % to
100.
■ Click Zoom.
■ Select the Auto Zoom check box again.
Zooming helps you see other markers that are farther apart.
8 Close the Drawing Cleanup dialog box and save the drawing.
Exercise 2: Extend undershoots | 95