Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, Руководство пользователя, Страница: 314 / 400

304
|
Chapter 24 Reshaping Entities
To add a vertex to a poly entity
1 Enter vertex editing mode.
2 Position the pointer on a segment where you want to add a new vertex
and click and hold the left mouse button. When you begin to drag, a new
vertex is created.
3 Drag the vertex to the new location and release the left mouse button
.
To add a segment at the end of a poly entity
1 Enter vertex editing mode.
2 Click one of the vertex endpoints of the poly entity.
3 Click the Extend button on the edit bar.
To create or modify a bulge in a polyline or polygon segment
1 Enter vertex editing mode.
2 Position the pointer on the segment where you want to create the bulge
and press CTRL. The segment is highlighted.
3 Drag the segment to position the bulge, then release the mouse button
and CTRL.