Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, Руководство пользователя, Страница: 297 / 400

Rounding an Intersection
|
287
Rounding an Intersection
On the Edit menu, click Trim, Round to create an arc with a predefined radius
to connect two existing entities smoothly. Lines, arcs, circles, and polylines
can be rounded with this command. AutoSketch trims off or extends the two
entities to meet the endpoints of the new arc.
■
When rounding a middle section of a polyline to another entity, the
polyline breaks into two polylines at that segment.
■
When rounding two adjacent segments of the same polyline, the arc
becomes a bulge segment of the polyline. Non-adjacent segments of the
same polyline are not allowed to round.
■
When rounding two end segments of a polyline, the polyline becomes a
closed polygon.
■
When a circle is rounded to another entity, it breaks into an arc at the
point where it intersects with the new arc.
A rounded corner may create three separate entities which are not joined
together. For information on joining entities, refer to
page 294 .
To round the intersection of two entities
1 On the Edit menu, click Trim, Round, or click the Round button on the
All-In-One toolbar.
2 (optional) Enter a radius length in the Radius text box on the edit bar and
press ENTER.
3 Click the first entity to round. Click the portion of the entity you want to
keep, near the point where it intersects the second entity.
4 Click the second entity to round. Click the portion of the entity you want
to keep, near to the point it intersects with the first entity.