Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT Скачать руководство пользователя страница 224 | Manualshive

Страница: 224 / 400

Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT Скачать руководство пользователя страница 224

214

|

Chapter 17

Working With Text

6

Enter the text. To enter more than one line of text, click Editor. For infor-
mation on using the Text Editor, see “Editing Text with the Text Editor”
on page 218.

7

Click OK.

For inplace editing, move the pointer away from the text box and right-
click or click CTRL+ENTER.

To add a text rectangle

1

On the Draw menu, click Text, Rectangle, or click the Text Rectangle
button on the All-In-One toolbar.

2

(optional) Change the edit bar values to adjust the font, height, and/or
angle, then press ENTER.

3

(optional) From the Justification drop-down list box on the edit bar, click
a justification. The justification determines the placement of the
basepoint.

4

Click the point that defines one corner of the text rectangle. A rubber-
band rectangle with an arrow appears beginning at the selected point. The
arrow points away from the basepoint (which is determined by the justi-
fication option you selected in step 4) and indicates the direction the text
box will extend to accommodate text.

5

Click the point that defines the opposite corner of the text rectangle.

Text input mode defaults to the last mode used (Edit Text dialog box or
inplace editing).

6

Enter the text. To enter more than one line of text, click Editor. For infor-
mation on using the Text Editor, see “Editing Text with the Text Editor”
on page 218.

7

Click OK.

For inplace editing, move the pointer away from the text box and right-
click or click CTRL+ENTER.

«
...
222
223
224
225
226
...
»

Содержание 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT

















































































































































































































































































































































































































Отзывы:

Нет отзывов