Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, Руководство пользователя, Страница: 167 / 400

Drawing Arcs Based on Points
|
157
An ellipse is a closed curve that resembles a flattened circle. Mathematically,
the path of a point that moves so the sum of the distances from it to a pair
of fixed points remains constant. You can draw an ellipse by specifying any
of the following:
■
A rectangle using two points (in which an ellipse is tangent to all four
sides)
■
Major and minor axes using three points
Tools for drawing arcs and circles can be accessed from the Draw menu or the
Arcs & Circles toolset on the All-In-One toolbar. You can also activate the Arc
or Circle toolbars (which contain the same commands but can be docked
anywhere onscreen) by right-clicking a bar, then clicking Toolbars on the
pop-up menu that appears. Simply check Arc or Circle, then click OK to make
the Arc or Circle toolbar visible onscreen.
Drawing Arcs Based on Points
The Draw menu has three commands for drawing arcs based on points. Two
of the commands, 3 Points and 2 Points & Center, have modifier keys. In
each case, pressing CTRL as you enter the third point switches the second
and third points. Instead of entering the startpoint, endpoint, and a point
along the arc, for instance, you can enter the startpoint, a point along the arc,
then, while pressing CTRL, enter the endpoint.
To draw an arc by specifying its endpoints and a third point
1 On the Draw menu, click Arc, 3 Points, or click the 3 Points Arc button on
the All-In-One toolbar.
2 Click the startpoint. A small diamond marks the point.
3 Click a second point. Another diamond marks this point and a rubber-
band arc appears and follows the pointer.
4 Click the endpoint or press CTRL and click a point along the arc.