Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT, Руководство пользователя, Страница: 166 / 400

156
|
Chapter 13 Arcs & Circles
An arc is a segment of a circle defined by a centerpoint, radius, starting angle,
and included angle. Two geometric properties define a circle: the center-
point and radius. You can change these properties by selecting an arc or circle
and changing the corresponding settings on the edit bar.
You can draw a circular arc by specifying any of the following:
■
Startpoint, endpoint, and a point on the arc
■
Startpoint, endpoint, and centerpoint
■
Startpoint, endpoint, and included angle
An elliptical arc is an ellipse with less than 360 degrees. You can draw an
elliptical arc by specifying any of the following:
■
A rectangle using two points (in which an ellipse is tangent to all four
sides), start angle, and included angle
■
Major and minor axes using three points, start angle, and included angle
You can draw a circle by specifying any of the following:
■
Centerpoint and a point on the circle
■
Two points on opposite sides of the circle
■
Three points on the circle.
■
Centerpoint and radius
■
Radius and two entities to which the circle is tangent
■
Three entities to which the circle is tangent