Auto-Sleepers 1993 Trophy, Инструкция по эксплуатации

Страница: 34 / 60

6.1
MAINTENANCE
1)
Work Surfaces
Laminated work surfaces are fitted to all furniture units. Whilst these are
hardwearing, hot pans should not be placed directly on these surfaces since damage could result.
2)
Furniture
Furniture should be cleaned with a proprietary furniture polish periodically. Any
water marks that may occur on the hardwood edging of the furniture units should be removed by
use of fine grade wire wool and furniture wax. Heavy stains may need to be sanded out and the
edging re-polished. Final finish may be achieved by using wire wool and wax.
3)
Soft Furnishin"s
Seats, cushions and other soft furnishings should be cleaned with a
proprietary fabric cleaner. It is important that liquid cleaning solvents do not come in contact with
cushion piping since the removal of the fabric material will result.
4)
5)
6)
7)
8)
9)
I 0)
Curtains
cleaned.
It is recommended that the thermally lined curtains are washed at 40
°
C and not dry
Exterior Paintwork and Fibre�Jass Exterior paintwork and fibreglass should be regularly
washed and polished with a non-abrasive car wax.
Acrylic Double Glazed Windows
Great care should be taken in the maintenance of these
windows and only approved materials used for the cleaning thereof.
Gas
Vents
All gas vents and flue pipes should be periodically checked for damage and should
be kept free from dirt.
IMPORTANT: BLOCKING OF VENTS AND FLUES IS
EXTREMELY HAZARDOUS AND SHOULD BE AVOIDED AT ALL TIMES.
Gas
Flexible Rubber
Hoses
All gas flexible rubber hoses should be changed annually and must
be secured at each end with jubilee clips. When removed they must be replaced with the approved
type. IMPORTANT: ALL FLEXIBLE HOSES MUST BE REPLACED ANNUALLY WITH
NEW HOSE TO BRITISH STANDARD 321211.
.
Oas Installation
IMPORTANT:
GAS INST ALLA TIO NS MUST BE INSPECTED
ANNUALLY BY QUALIFIED PERSONNEL. IF IN DOUBT CONTACT YOUR LOCAL
AUTO-SLEEPER DEALER. MODIFICATIONS SHOULD NOT TAKE PLACE UNLESS
CARRIED OUT BY QUALIFIED TRADESMEN.
Seat Restraints
IMPORTANT: SEAT RESTRAINT MOUNTINGS SHOULD BE
CHECKED FOR TIGHTNESS ANNUALLY AND RETIGHTENED IF NECESSARY TO A
TORQUE SETTING OF 24 NEWTON METRES. IN THE EVENT OF ANY IMPACT OF 25
MPH OR OVER IN WHICH SEAT BELTS HA VE BEEN WORN, THEY MUST BE
REPLACED BEFORE THE VEHICLE IS USED AGAIN.
Spare Wheel
The spare wheel is located under the side sliding door footwell. The wheel
may be removed by first undoing the two anchoring bolts thus allowing the hinge bar to be
lowered and thus releasing the spare wheel. For re-stowing the reverse should be carried out.