Programming Instructions for : Pressure
Spek Pro Fuel Rail Pressure Gauge
Refer to the “Flow Chart Programming Instructions” while reviewing this guide.
Gauge is field programmable by the operator while installed in the vehicle. This programming is
accessed by pressing the control buttons located on the face or the meter dial,
ONE AT A TIME
. The
“Down” and “Up” buttons move the pointer to a desired setting or controls the faceplate illumination.
NORMAL/DIAL BRIGHTNESS
PEAK PLAYBACK
HIGH RED-LINE SETTING
LOW THRESHOLD SETTING
C
O
L
O
R
S
C
H
E
M
E
DIAL BRIGHTNESS
OPTION:RESTORE FACTORY DEFAULT
OPTION:DEMO MODE
OPTION:ADJUST POINTER BRIGHTNESS
MAIN MENU
SUBMENU
PRESS “MODE” BUTTON TO PROGRAM LEVEL. THEN PRESS BOTH CENTER AND
LEFT OR CENTER AND RIGHT BUTTONS FOR FIVE SECONDS TO ENTER SUBMENU
DOWN MODE UP
+
–
OPTION: CALIBRATE GAUGE TO ENVIROMENT