Auto Crane HC-5 NEXSTAR Скачать руководство пользователя страница 19

Страница: 19 / 88

NexStar Operation

HC-7X NEXSTAR

Menu Screen Layout

To enter the menu screen, first fully depress and hold the trigger, then press the Engine Start/Stop switch

down to Engine Stop and then release the trigger. The screen above will be displayed. The left joystick

is used to navigate through the menu. To enter into the Diagnostics and Set Up sub menus, highlight

them and depress the trigger. To back out of the menu(s), Engine Start/Stop switch down to Engine Stop

(unless directed otherwise via on-screen instructions).

Crane Auto-Stow

– Automatically stows the crane back to home position. Reference Auto Stow

section in NexStar Operation.

Maximum Speed Setting

- Displays the current maximum speed setting.

Joystick Mode

- Displays the current mode selected.

Personnel Basket

– For use when Auto Crane Personnel Basket is attached to crane. Reference

Personnel Basket Mode section in NexStar Operation.

Diagnostics

- Displays four options (Active Alarms, Joystick Inputs, Switch Inputs, and Outputs) to

help aid in troubleshooting.

Set Up

- Displays two usable options: Adjust Brightness of screen and Adjust Sleep Timer for remote

auto shut-off. “Set Home Position” is part of the Crane Auto Stow program. Reference Auto Stow

section in NexStar Operation.

Stability Test Mode

– For dealer use only.

Содержание HC-5 NEXSTAR

























































































Результаты поиска

Содержание HC-5 NEXSTAR

Отзывы:

Auto Crane HC-5 NEXSTAR, Руководство пользователя, Страница: 19 / 88

Результаты поиска

Содержание HC-5 NEXSTAR

Отзывы: