Auto Crane HC-10 NEXSTAR Скачать руководство пользователя страница 2

Страница: 2 / 92

At the time of publishing this manual is accurate to the best of our knowledge. Auto Crane reserves the

right to change any or all items, components and parts, necessary for any reason. This right does not

obligate Auto Crane to immediately update the manual. If in doubt, please call your local Auto Crane

distributor for the most up-to-date information. Auto Crane Company issues a limited warranty with each

unit sold. See warranty pages at the end of the manual.

Product Registration

Thank you for purchasing an Auto Crane® product and taking a few moments to register it online at

https://www.autocrane.com/product-registration/

. Your registration helps us keep you up to date on

product information and gives you one of the strongest manufacturer’s limited warranties available.

By completing the product registration, you may be eligible for valuable supplemental coverage under

Auto Crane’s Limited Warranty. For more information and a list of eligible products, visit our Warranty page

found at

https://www.autocrane.com/warranty/

Before You Register

What do I need to get started?

We’ll ask for:

• The product model and serial number for each product you purchased

•

Your contact information so we can send confirmation of your registration and communicate

product bulletins

• The date you purchased the product, date of installation or in-service (e.g. copy of bill of sale)

• Truck VIN (if applicable)

• The name, address and phone number for the dealer who sold and installed your equipment

NOTE

: Much of this information will be on the invoice provided by your dealer. If you need help, please

contact your installing dealer.

Содержание HC-10 NEXSTAR





























































































Результаты поиска

Содержание HC-10 NEXSTAR

Отзывы:

Auto Crane HC-10 NEXSTAR, Руководство пользователя, Страница: 2 / 92

Результаты поиска

Содержание HC-10 NEXSTAR

Отзывы: