Autel MaxiCheck MX808 Скачать руководство пользователя страница 106

Страница: 106 / 140



User Info

– displays detailed information of your registered online Autel

account, such as your Autel ID, Name, Address and other
contact

information.



Device Info

– displays the registered product information, including the

Serial Number, Registration Date, Expire Date, and Warranty Period.

Update Info

The Update Info section displays a detailed

record

of the product

’s

software update history, including the product serial number, software
version or name, and the update time.

Service Info

The Service Info section displays a detailed record of the device

’s service

history information.

he device

's service history including completed

service repairs and software re-installations will be recorded and

synchronized

with the associated account.

User Complaint

The User Complaint screen allows you to

initiate

a complaint case, as well

view historical complaint records.

Содержание MaxiCheck MX808













































































































































Результаты поиска

Содержание MaxiCheck MX808

Отзывы:

Autel MaxiCheck MX808, Руководство пользователя, Страница: 106 / 140

Результаты поиска

Содержание MaxiCheck MX808

Отзывы: