29
Power Supply Wiring
WARNING
Risk of Electric Shock
Only a qualified electrician is allowed to determine the electrical requirements and
connect wires.
Ensure the power is off before connecting the wires.
IMPORTANT
Before connecting wires, ensure the following requirements are met:
Use 90 °C copper wire only.
The circuit breaker at the panel must be off.
The MaxiCharger must be grounded to true earth.
An insulated grounding conductor must be installed as part of the branch circuit that
supplies the MaxiCharger.
The grounding conductor should be grounded to earth at the service equipment or,
when supplied by a separately derived system, at the supply transformer.
All connections must comply with all local codes and ordinances.
Use 25 mm
2
wires.
Connecting to the PE Wire
1. Remove the six M5 security screws (A) on the right side of the MaxiCharger using a
T25 Torx screwdriver to remove the side cover (B). Set them aside.
