52
1.
Table 9-2 Diagnostics Toolbar Buttons
2.
Status Information Bar
3.
Main Section
Column 1
—
displays retrieved codes from the vehicle.
Column 2
—
indicates the status of the retrieved codes.
Column 3
—
provides detailed descriptions for retrieved codes.
Column 4
—
only displays when Freeze Frame data is available for viewing. Selecting
this icon will display a data screen, which looks and behaves similar to the Read
Codes screen.
4.
Function Buttons
Service Manual
—
tap to view fault code information, repair instructions, and other
help information.
Freeze Frame
—
a snowflake icon displays when freeze frame data is available for
viewing. Tap the icon to display data screen. The Freeze Frame interface is similar to
that of the Read Codes interface and shares similar operations.
Search
—
tap to search the selected DTC for additional information on the Internet.
ESC
—
tap to return to the previous screen or exit the function.
9.8 Erase Codes
After reading the retrieved codes from the vehicle and certain repairs have been made, you
can erase the codes from the vehicle by using this function. Before performing this function,
make sure the vehicle's ignition key is in the
ON
(RUN) position with the engine off.
To erase codes:
1.
Tap
Erase Codes
in the Function Menu.
2.
A warning message will display to inform you of data loss when tapping this button.
a)
Tap
Yes
to continue. A confirmation screen will display when the operation is
successfully completed.
b)
Tap
No
to exit.
3.
Tap
ESC
on the confirmation screen to exit Erase Codes.
4.
Check the Read Codes function again to ensure the operation is successful.