EVO NEST
QUICK GUIDE
Страница 1: ...EVO NEST QUICK GUIDE ...
Страница 2: ... please contact the official support service of Autel Robotics at 844 692 8835 2 Pedestal installation 1 The charging pedestal has 4 arm fixing clips The two shorter fixing clips are marked with E and the higher fixing clip is marked with F The E fixing clip is used to fix the rear arm and the F fixing clip is used to fix the front arm 2 After fixing the arm install the battery to the drone and co...
Страница 3: ...ition of the cover changes please call Autel Robotics support team for technical assistance Do not make any changes without direction from a representative of Autel Robotics For your safety please use a three phase power plug 5 Pre flight Confirmation 1 Make sure that the drone is placed in the center of the charging board 2 Check carefully whether the connection of the power supply and the network ...
Страница 4: ...r severe weather special inspections need to be carried out in time 4 Pedestal If you need to replace the pedestal please use the pedestal provided by Autel Robotics 5 Control module If you need a charging control module or a position bar control module please use the replacement module provided by Autel Robotics 7 MAINTENANCE Please follow the steps below to upgrade the App and firmware of EVO NE...
