Autel Robotics EVO II Pro Enterprise, Руководство пользователя

Страница: 42 / 64

42
3.3 Aircraft preparation
3.3.1 Extend aircraft

Take down and reinstall the gimbal protective cover
First take down the gimbal support, and turn on the aircraft. As shown in the figure below.
After the aircraft is used, the gimbal protective cover shall be reinstalled to prevent the gimbal
from damage.

Extend the arm and propeller

Please remember to always extend the arm of the aircraft before turning on the aircraft power
switch.

Please first extend the front arm, and then the rear arm.
Important

Before folding the arms, turn off the aircraft power switch.
3.3.2 Install the propeller
EVO II Enterprise use noise-reduction rapid-disassembled propellers.
Warning

Before installing or disassembling the propeller, please turn off the aircraft power switch.