Autel Robotics EVO 2 PRO, Руководство пользователя

Страница: 24 / 55

24

Low aircraft battery
The failsafe is triggered whenever one of the following errors occurs:
1) The aircraft continuously calculates the battery power required for returning to
the home point. If the battery power is sufficient for the aircraft to return to the
home point, the App will show a notification. The failsafe will be activated and
the aircraft will start the auto-return process. In the meantime, you can press
the Pause button (
) to regain control over the aircraft.
2) When the battery level of the aircraft reaches the set threshold (25% by default),
you will receive a low battery warning, the failsafe is activated, and the aircraft
will automatically return to the home point. If you regain control over your
aircraft, when the battery level reaches 15%, you will receive a critically low
battery warning, and the aircraft will automatically land in the current place. For
any emergency, press the Pause button (
) to stop landing and manually fly
the aircraft to the nearest safe landing point.
Note

When the battery level of the aircraft reaches 25% (low battery warning),
if the horizontal distance between the aircraft and the home point is less than
50 meters (150 ft), the aircraft will not execute the auto-return procedure.

If no GPS signal is available when a low battery warning is displayed, the
aircraft will not execute the auto-return process. The aircraft will enter the ATTI
mode and continue to be controlled by you. When the battery level reaches
15% (critically low battery warning), the aircraft will land automatically.
3. Feature

Landing Protection
When the aircraft arrives above the home point, this feature will detect the ground
environment below. If the ground is flat, the aircraft will land automatically.
Otherwise, it will hover and wait for the next instruction.

Accurate Landing
When this feature is activated, the aircraft will land as close to the takeoff point.
Important

The aircraft will record the takeoff point as the default home point. The
accurate landing only takes effect when the home point is not updated during
the flight.

Select an open area with sufficient light as the takeoff point.