background image

Original instructions

Air series

Part D: receiving unit

HACrP8 (rPD)

inDex

1 Description 

 ............................................................................................................  2

Technical data  .......................................................................................................  2

Technical data sheet  .............................................................................................  4

4 Plates 

 .....................................................................................................................  4

4.1  Plates on HACRP8 unit in a radio remote control  .............................................  4

4.2  Plates on HACRP8 unit in a Take & Release radio remote control  ...................  4

4.3  Plates on HACRP8 unit in a Multi Units or Multi Receiver radio remote control   5

Warnings for installation  ......................................................................................  5

5.1  Mounting and fastening the receiving unit in the best position  ..........................  5

5.2  Positioning the antenna  ...................................................................................  6

5.3 Wiring  ..............................................................................................................  6

Light signals  ..........................................................................................................  6

7 Operation 

 ...............................................................................................................  7

7.1  Electronic module  ............................................................................................  7

7.2  DIP switches  ....................................................................................................  7

7.3  Command outputs  ............................................................................................  7

Malfunction signalled by the receiving unit  ........................................................  7

AUTEC

LIRPDE00-03

Содержание HACRP8









Отзывы: