AUTEC DYNAMIC+P Series Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 44

AUTEC DYNAMIC+P Series Скачать руководство пользователя страница 30

LIUPJQ001_eng-00

AUTEC

30

9

Instructions for the User

The chapter "Instructions for the User" in "Part A" of the Instruction Manual contains the

warnings for the use that add to those provided in this chapter. Therefore, please refer to

that part of the Manual.

The following instructions are general, they refer to general usage situations for the Transmitting

Unit, and indicate how people should or should not behave when using the unit: these do not

cover any possible risk situation and/or drawback that may depend on specific applications of

Autec Radio Remote Controls.

However, instructions given in the following paragraphs do not replace nor complete the

instructions that must be provided to the User by the Manufacturer of the Machine where an

Autec Radio Remote Control (to which the PJQ Transmitting Unit belongs) is installed.

9.1

Usage restrictions

If the Radio Remote Control User wears electronic devices (by way of example:

pacemaker, implantable cardiac defibrillator, hearing aids), the Transmitting

Unit must be kept at least 15 cm away from those devices when in use.

Do not expose the Transmitting Unit to strong magnetic fields, as they may

affect the correct operation of the Unit (its immunity level is provided in chapter

).

9.2

User behaviour

Besides the instructions contained in the General Part (Part A) of the Instruction Manual, when

using the Transmitting Unit, the User must:

-

Observe and comply with all instructions and warnings provided by the Machine Manufacturer.

-

Observe and comply with all instructions and warnings provided by the Installer.

-

Observe and comply with all instructions and warnings provided by the Person responsible for

the Machine commissioning or making the Machine available for work.

-

Observe and comply with all instructions and warnings provided in the Radio Remote Control

Manual.

-

Observe and comply with all applicable Laws, Regulations and Standards, even local.

-

Follow and put into practice the working instructions he received, and/or those he must be

aware of because of his work and his tasks.

-

Avoid using the Radio Remote Control if he has not been properly trained and prepared, and if

he has not been qualified for its use by the Person responsible for the work.

«
...
28
29
30
31
32
...
»

Содержание DYNAMIC+P Series













































Отзывы:

Нет отзывов