Austroflamm Sina, Руководство по эксплуатации

Страница: 36 / 64

10 | Settings EN Operating manual Sina / Sina Xtra
36
10 Settings
10.1 Aligning the stove
Fig. 43: Aligning the stove
1) First the cover and the side cladding must be de-
tached.
ð Proceed as described in the section Removing the
side cladding.
2) There are two screw on the back of the stove. These
can be used to align the stove.
ð When doing so take note of the type of floor.
Should the floor under the stove be made of tiles,
wood, laminate etc., the floor can be damaged.
10.2 Adjusting the door
2
2
1
2
2
1
Fig. 44: Door adjustment screws
1) Open the door.
2) The door can be adjusted on the screws.
ð Using the screws (1) the door can be adjusted up,
down, left and right.
ð Using the grub screws (2) the door can be adjus-
ted in and out.