Austroflamm 48x51x51 S3, Руководство по эксплуатации

Страница: 29 / 94

Operating manual Fireplace inserts S3 EN 6 | Transport, handling and storage
29
6 Transport, handling and storage
6.1 Transportation
Fig. 3: Crate
Immediately checked the goods delivered for complete-
ness and damage in transit.
Before installing the fireplace insert, check that all movable
parts are working. Any defects before the installation of the
fireplace insert must be reported.
Transport is with a crate. Use a lifting truck or forklift to
transport the crate including the fireplace insert.
Remove the crate and dispose of it appropriately.
6.1.1 Detaching the transport lock
Before the fireplace insert is clad, it is vital that the transport lock is removed and the functioning of the
sliding doors checked. Depending on the model, the counterweight of the sliding door is secured on
the outside left or on both sides outside or on the rear panel of the appliance with a coloured screw
and a shim.
NOTICE
It is vital that the transport lock screws are removed before the appliance is installed!
1
Fig. 4: Removing the transport lock
For transportation the fireplace inserts are in addition fixed
to the pallet with transport locks. These must be removed
before installation.
1) Undo the screws and remove the transport locks.