Austro Engine AE300-Wizard Скачать руководство пользователя страница 23

Страница: 23 / 89

AE300-Wizard

Document No.:

E4.08.09

AE_xx_000

Revision:

Page:

23 of 89

Dept.:

Electric/Electronic

Type:

User Guide

Example:

The two green lights indicate that connection to both ECUs has been established

Below the green lights information about serial numbers and revisions is displayed.

On the right hand half of the screen the real time engine data and status information is

displayed. Data sent by the “active” ECU is indicated by a white background color.

On the bottom of the right hand half of the screen the engine and ECU operating hour

counters and real time clock setting can be found.

Note:

This information is not being updated during the diagnostic session, but sampled

and frozen at the time connection to the corresponding ECU has been established.

Both caution lamps are on (pictured by the two red lights) indicating that there are en-

tries in the Fault Code Memory.

Pressing Read Fault Code Memory will provide more details, e.g.:

Pressing Clear Fault Code Memory will provide an auto-save functionality. The DTC
(Diagnostic Trouble Code) memory, the engine statistic and the IQA values will be saved

in the file:

“

AE300-Wizard\Engine_Log\AutoSave_Engine_Log_YYYYMMDD_nnnnn.ae3

”.

For further assistance see chapter “8 Diagnostic Procedures” on page 34.

Hint:

Since version 1.3.4.xxx it is not possible to start the Wizard (accidently) twice.

6.5

Saving of Data during a Diagnostic Session

The various diagnostic functions provide the capability to save data like “Engine Logs”,

“Event Logs”, “Data Logs” or IQA data on the PC system for later offline analysis.

Offline analysis doesn’t require a USB/CAN-adapter dongle

Default location for saved data is: “

My Documents\Austro Engine\AE300-Wizard

”

Data is organized by folders like: “

Engine_Log

”, “

Flash

”, “

HexDump

”, “

LiveView

”, etc.

Data is saved in a compressed and encrypted format (“

.ae3

” file extension) for offline

analysis using the AE300-Wizard or other tools

Содержание AE300-Wizard

























































































Результаты поиска

Содержание AE300-Wizard

Отзывы:

Бренды по названию

Популярные бренды

Austro Engine AE300-Wizard, Руководство пользователя

Результаты поиска

Содержание AE300-Wizard

Отзывы:

Бренды по названию

Популярные бренды