PICOBLU
INSTALLATION AND OPERATION MANUAL
8
BLUETOOTH
®
AUDIO STREAMING
The mixer amplifier includes a Bluetooth
®
Audio streaming interface which can receive audio from any device like a mobile phone,
computer or tablet. Simply connect your Bluetooth
®
device and it will mix in to the amplifier output.
BLUETOOTH
®
CONNECTION
1. Turn on the Bluetooth
®
module by holding the Bluetooth
®
ON/OFF power button down for more than 150ms
2. Enter pairing mode by holding the Bluetooth
®
ON/OFF button down for 2 seconds. The PAIR LED should start flashing every
200ms
3. On your Bluetooth
®
device, not the PICOBLU, select the Bluetooth
®
device named as ‘AUS MONITOR’. Consult the device’s
manual about accessing the Bluetooth
®
connection options.
4. Your Bluetooth
®
device will ask for a passcode/PIN. Enter
2626
5. The PAIR LED will then flash 10 times to indicate successful pairing
6. Play audio from your Bluetooth
®
device.
BLUETOOTH
®
CONNECTION RANGE
The Bluetooth
®
connection range is a minimum of 10 meters. However, range is typically much larger but not guaranteed.
CONNECTING A DIFFERENT BLUETOOTH
®
DEVICE
The Bluetooth
®
module can only support one device connection at a time.
If you need to change devices, repeat the Bluetooth
®
connection process described above. By entering pairing mode it disconnects the
current device and allows a new device to be connected.
POWER OFF THE BLUETOOTH
®
DEVICE
To power off the Bluetooth
®
module hold down the Bluetooth
®
ON/OFF button until the PAIR LED turns fully on (not flashing) and then
release the button.
IMPORTANT:
Ensure that the volume of your Bluetooth
®
device is set to an appropriate level as this effectively adds in
another volume control to your system.
NOTE:
The Bluetooth
®
module is powered off as standard when turning the amplifier on to maximise security. If the amplifier
is power cycled you must turn the Bluetooth
®
module back on by pressing the Bluetooth
®
ON/ OFF button.
Bluetooth Device Name: AUS MONITOR
Passcode/PIN: 2626 (AMAM)