PICOBLU
INSTALLATION AND OPERATION MANUAL
6
1
2
3
4
6
5
CH 1
XLR input – This is a balanced microphone input with an input sensitivity of 3mV.
RCA input – This is an unbalanced line level input. It has an input sensitivity of 405mV. The two RCA sockets are summed to
mono internally.
CH 2-3
RCA Input: These are unbalanced line level inputs. They have an input sensitivity of 405mV. The two RCA sockets are summed
to mono internally.
CH2 RCA input is mixed with the 3.5mm front panel auxillary input.
CH3 RCA input is mixed with the Bluetooth
®
input.
LINE OUTPUT
The LINE output is on an unbalanced RCA connector. The output level is 766mV with an output impedance of 4.7kΩ at the
rated output.
The mono output signal is split across two RCA outputs.
SPEAKER OUTPUT
The class AB amplifier output features 100V Line or 4Ω low impedance.
NOTE: Only one output type should be used at a time.
MUTE INPUT
To enable CH1 priority (i.e., mute CH2 & CH3), connect the two contacts together with the mute illustration on the speaker
terminal block
MAINS INPUT CONNECTOR
Your amplifier is fitted with a standard IEC 60320-C14 socket for mains connection. Use the mains cable supplied to power up
the unit.
NOTE: Your unit must always be earthed!
REAR PANEL
6
5
4
3
1
2