ISP SERIES
Congratulations on choosing Australian Monitor for your
professional amplification requirements.
The design of our ISP series constant voltage power amplifiers
embraces all the aspects of a well-designed amplifier. The visual
design, mechanical, electrical and sonic parameters, along with our
dedicated manufacturing process, have all been optimised to provide a
professional tool that exhibits quality, reliability and longevity.
The ISP series power amplifiers are 1 unit 1.75” high, 19” wide, or 2 unit
3.5” high, 19” wide rack mountable units depending on the model.
Models are available in 2 and 4 channel versions. The ISP amplifier is
fully controllable over an Ethernet interface which provides
configuration and monitoring capabilities. An included DSP also
allows control of the volume, matrix mixing, high/low/all pass filters,
compressor/limiter and delay which feeds an efficient Class D
amplifier to deliver 120W or 250W of output power per channel.
These amplifiers have been specifically designed to deliver
their high power output with minimal distortion, and provide
the critical degree of control required by your speakers.
Rating plate and caution marking are marked on the back enclosure of the apparatus
Revision 1.0: Sep 2019
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT & FULLY INSERT.
CAUTION
THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user to
the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may
be of sufficient magnitude to
constitute a risk of electric
shock to persons.
WARNING
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance
For European Union countries: This symbol on the
product or its packaging indicates that this product
must not be disposed of with other waste.
Instead, it is your responsibility to dispose of your
waste equipment by handing it over to a designated
collection point for the recycling of waste electrical
and electronic equipment.
Please contact your local authority for further details
of your nearest designated collection point.
INTRODUCTION & CONTENTS
ISP SERIES
INSTALLATION AND OPERATION MANUAL
Introduction
3
Features & Protection Features
4
Front Panel
5
Rear Panel
6
Installation & Setup
7
Basic Setup & Operation
16
Website User Interface
17
Maintenance, Fire Safety Compliance
21
Specifications
22
3