AUSTRALIAN MONITOR ES120P Скачать руководство пользователя страница 3

ESP SERIES

Congratulations on choosing Australian Monitor for your 

professional amplification requirements.

Available in 120, 250 and 500 watt versions, the ESP series are 2 RU 

power amplifiers, featuring 100 volt line and 4 ohm outputs.

The Australian Monitor ESP series gives the contractor a low cost

solution in applications that are price sensitive but still require

a high quality of sound reproduction and reliability.

Rating plate and caution marking are marked on the back enclosure of the apparatus

Revision 2.0: Feb 2020

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE 

OR OTHER OUTLET UNLESS THE BLADES  CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE 

TO RAIN OR MOISTURE.

TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT & FULLY INSERT.

CAUTION

THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.  

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT 

CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

The lightning flash with 

arrowhead symbol, within 

an equilateral triangle, is 

intended to alert the user to 

the presence of uninsulated 

“dangerous voltage” within the 

product’s enclosure that may 

be of sufficient magnitude to 

constitute a risk of electric 

shock to persons.

WARNING

TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT 

REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS 

INSIDE. REFER SERVICING 

TO QUALIFIED SERVICE 

PERSONNEL.

The exclamation point within 

an equilateral triangle is 

intended to alert the user to 

the presence of important 

operating and maintenance 

(servicing) instructions in the 

literature accompanying the 

appliance

For European Union countries: This symbol on the 

product or its packaging indicates that this product 

must not be disposed of with other waste.

Instead, it is your responsibility to dispose of your 

waste equipment by handing it over to a designated 

collection point for the recycling of waste electrical 

and electronic equipment.

Please contact your local authority for further details 

of your nearest designated collection point.

INTRODUCTION & CONTENTS

ESP SERIES

 INSTALLATION AND OPERATION MANUAL

3

Introduction 

Features & Protection Features 

Front Panel

5

Rear Panel 

6

Installation

7

Troubleshooting 

8

Dimensions: ES120P, ES250P 

9

Dimensions: ES500P

10

Specifications: ES120P, ES250P  

11

Specifications: ES500P 

13

Содержание ES120P

















Отзывы: