AUSTRALIAN MONITOR AMIS ZRM4, Информация о сервисе

Страница: 4 / 20

I N T R O D U C T I O N A N D C O N T E N T S
A M I S Z R M 4 I N S TA L L AT I O N & O P E R AT I O N M A N UA L
PAG E 3
The AMIS ZRM4 is an easy to use, yet highly featured 1 RU zone
routing mixer. It features 6 inputs that can be balanced XLR mic or
dual RCA/balanced XLR line level, all of which are available to any
combination of 4 zone outputs.
Input #1 can be designated as a paging input with priority over all
other inputs, individually selectable at each zone output. Front panel
switches with LED indication provide for the simple routing of each
input. Each input has bi colour status LED indication & 2 stage
equalization. Each input has an internal gain trim which can provide
a f/- 15dB of gain, to allow the perfect set up of input gain no
matter what the input signal may be. Phantom power & high pass
filters are also supplied per input.
Each balanced XLR zone output features a dual colour status LED
& switchable paging mic priority. Remote VCA's are available for each
output allowing for a wall mounted volume control to be installed in
remote zones allowing for a volume range from off to whatever the
master level on the AMIS ZRM4 relevant zone output is set to.
Alert, Evacuation, Bell & Pre Announce tones are provided on board.
The AMIS ZRM4 is a compact yet extremely versatile zone routing
mixer which makes the complex task of multizone signal routing
simple & cost effective.
I N T R O D U C T I O N 3
F R O N T PA N E L 4
R E A R PA N E L 5
I N T E R N A L A D J U S T M E N T S 6
B A S I C S E T U P A N D O P E R AT I O N 7
A DVA N C E D F E AT U R E S 8
B L O C K D I AG R A M 9
S P E C I F I C AT I O N S 1 0
This symbol is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence
of important operation and maintenance (servicing)
instructions in the literature accompanying the appliance.
To prevent electric shock do not use this (polarised) plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade exposure.
To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
Caution:
AUS, EUR, USA
Copyright 4th Mar 2005
Rev A: 4th Mar 2005