manualshive.com logo in svg

AUSTRALIAN MONITOR AMD2100P, Инструкция по установке и эксплуатации, Страница: 10 / 20

Поделиться
Скачать
AUSTRALIAN MONITOR AMD2100P Скачать руководство пользователя страница 10

Go Online

The Go Online dialog is presented when selecting Device/Go Online from 
the main menu, or when selecting the Go Online button at the bottom left 
of the main page.

Once initiated, the auto discovery mechanism will search for AMD P Series 
amplifiers connected to the wired network. 

The user may connect to a discovered device by selecting the device in 
the Discovered Devices window followed by pressing the Connect button.

Note: 

The PC network interface and amplifiers must be on the same 

network subnet for discovery and connections with the GUI to function.

The user may simply enter a known amplifier IP address in the IP Address 
field and connect without performing a discovery first.

The IP address details for selected device may be edited by pressing the 
Edit Dev IP button.

Edit Dev IP

The IP address details for a connected amplifier may be edited by 
selecting the Edit Dev IP button on the Go Online connection dialog.

The user may edit the device IP Address, Subnet Mask and Default 
Gateway.

When defining a Default Gateway address, be sure the Gateway Address 
is on the same subnet as the new Device IP Address.

PAGE 10

AMD SERIES INSTALLATION AND OPERATION MANUAL

SOFTWARE APPLICATION

Содержание AMD2100P





















Отзывы:

Нет отзывов