Aussie BUSHMAN 7710.8.641 Скачать руководство пользователя страница 1

Страница: 1 / 28

LP Gas Grill

Assembly and Use Manual for:

Bushman

For Customer Service, call 1-800-251-7558 or visit our web site at www.aussiegrills.com

FOR OUTDOOR HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE.

• Failure to follow these instructions could result in fire or explosion which could cause death,

serious personal injury, or property damage.

• Read and follow instructions carefully before assembly or use.
• Do not use this product for any other purpose than which it is intended.
• These instructions must be kept with the user.

SAVE THESE INSTRUCTIONS

If you smell gas:

1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the

appliance and immediately call your gas
supplier or your fire department.

1. Do not store or use gasoline or other

flammable liquids or vapors in the vicinity

of this or any other appliance.

2. An LP cylinder not connected for use shall

not be stored in the vicinity of this or any
other appliance.

Deluxe

Bushman

Deluxe

For use with models:
7710.8.641
7710S8.641

Содержание BUSHMAN 7710.8.641





























Результаты поиска

Содержание BUSHMAN 7710.8.641

Отзывы:

Похожие инструкции для BUSHMAN 7710.8.641

Бренды по названию

Популярные бренды

Aussie BUSHMAN 7710.8.641, Инструкция по сборке и использованию

Результаты поиска

Содержание BUSHMAN 7710.8.641

Отзывы:

Похожие инструкции для BUSHMAN 7710.8.641

Бренды по названию

Популярные бренды