Installation guidance
Installation (continued)
Match the corresponding active
(brown), neutral (blue) and
ground wire (yellow-green) and
tighten up screws to make sure
power is properly connected.
Insert Plenum mounting bracket
through the ceiling to base. Pay
attention as
the “C” hook must
match the
corresponding “C”
area on the base. Finally fasten.
Insert 4xM8 bolts, washers,
spring washer and metal plate
via mounting frame to the base.
Plug the connectors on the
plenum to the base.
Push plenum into outlet duct and
fasten 16xM4 screw on the
bottom. Finally add the filters to
the sides of the plenum.
Important: ensure the tightening
torque from 12 to 14 NM
Содержание K3600-50
Страница 3: ...Introduction ...
