AUSSIE FIT SPORT SCIENCE
NANO-ST 3D MOTION SENSOR PEDOMETER
WITH AUTO EXERCISE TIMER
USER’S INSTRUCTION
Thank you for your purchase of this Aussie Fit Sport Science 3D Motion Sensing Pedometer.
The utmost care has gone into the design and manufacture.
Please read the manual carefully and keep it for further reference.
FEATURES:
•
3D motion sensor
•
1 second auto exercise timer for 10 hours
•
Step counting up from 1 to 99,999
•
3 step filter to eliminate non-step
movements
•
Auto on/off power saving
•
Removable waist band/belt clip
•
Lithium 3V CR2032 battery
•
Sweat and splash resistant
FUNCTION BUTTONS
MODE button:
- Press it to switch between step counting and
time counting mode.
- Press and hold it for 2 seconds to clear all the
values.
RESET button:
- In case of malfunction, the unit may be reset
by pressing the reset button using a
paperclip/wire inserted into the hole in the back
of the pedometer.
PRODUCT DESCRIPTION
1. LCD
4. Removable Clip
2. MODE button
5.Battery door
3. RESET button hole
DISPLAY SYMBOLS:
Step counting mode
Time counting mode
STEP COUNTING AND TIME COUNTING
1.
In step / time counting mode, press and hold
MODE button for 2 seconds to clear all the
values.
2.
Press MODE button once to switch
between step and time counting mode to
check the value.
3.
Both step counting and time counting functions
are automatically detected by the 3D motion
sensor.
Note:
1.
After stopping for over 1 second, counting will
resume after 3 steps are registered, including
those 3 steps.
2.
To start a fresh days step count, press and hold
MODE button for 2 seconds to clear previous
steps and exercise time. After 3 steps the new
step and time data will register.
3.
Daily data should be recorded as there is no
memory once data is cleared.
4.
The maximum counting is 99,999 steps and 10
hours exercise time, if you wish to accumulate
steps and time.
