background image

www.ausrv.com   

    

Ph: 833 872 8778

78

Charging System - BM Pro

Your trailer is fitted with a BM PRO Battery Plus 35SR management unit. This unit controls all power input to the trailer. 
The unit is a multi-stage charger for solar, vehicle and shore power input.

Failure To Follow These Instructions May Result In Death Or Serious Injury!

Warning

 

 

Batteries are electrically live and must be treated with extreme caution. They can supply high short  

 

circuit currents, even if they appear damaged or undamaged.

 

 

Do not allow water or other liquids to enter the power supply area.

 

 

Contact with water will cause the device to short-circuit or corrode

 

 

Do not use this product in environments that are excessively hot, cold, dusty, or humid or where  

 

it will be exposed to magnetic fields or long periods of sunshine. Such exposure may cause the    

 

product or your battery to fail, catch fire or explode.

 

 

Clean the housing of this product lightly with a dry or moist cotton cloth. Do not use alcohol,  

 

 

thinners, benzene, or any other chemical cleaner.

 

 

 The MiniBoost is a high precision electronic product. It contains no user-serviceable parts inside. Do  

 

not try to dismantle, modify, or repair it yourself. Disassembly, service, or repair by an unauthorized  

 

person will void the warranty.

Important

• 

Never store items in the area of the BM PRO unit.

• 

Never block vents associated with the BM PRO unit storage.

• 

Do not modify or attempt own repairs on the BM PRO unit.

• 

Maintenance and repairs should only be carried out by a suitably qualified and accredited person.

Содержание X11 2021














































































































Отзывы: