No.
Description
Introduction
①
IR receiving window
Receive the commands sent by the infrared remote control.
②
HDMI input indicators
The selected input channel indicator will light up.
③
HDMI output indicator
Lighting when OUTPUT port has signal output.
④
HDMI input port switch
button
Short press: Loop to select the INPUT 1-4 channel
Long press: Auto switch function enabled or disabled.
(Enabled by default). When the input channel LED indicator
flash for one time, the auto switch is turned on; when the input
channel LED indicator flash for three times, the auto switch
function is closed.
⑤
Power status indicator
Lighting when power on.
No.
Description
Introduction
①
Power jack
Requires 5V power supply
②
HDMI output port
Connects to TV/monitor by HDMI cable
③
HDMI input ports
Connects to your source device by HDMI cable.
Supports 4 inputs.
* Please take out the film at the rear of the remote before you use. Please insert the film to remote rear if you do
not use the remote for long time.
Battery Type: CR2025 3V.
Remote
keys
Panel
keys
Functional description
OFF /
/
Enable Standby mode
In standby mode, all input indicators are off
ON /
SWITC
H
Disable Standby mode
Press the SWITCH button to power on in
standby state
1 ~ 4
SWITC
H
Input channel selection
AUTO
AUTO
Auto switch function enabled or disabled.
Press the Panel key more than 3 seconds
to enable or disable this function.
∧
/
∨
SWITC
H
Loop to select the INPUT1-4 channel
