Under Desk/Wallmount Rack
5
Masonry and Concrete Wall
Installation (Vertical and Horizontal)
1. Position the rack against the wall. Use the included
bubble level to ensure the rack is level.
2. Mark the narrow end of the keyholes with a pencil.
3. Drill M10 (10 mm or
3/8 in.) holes into the
masonry or concrete 1.5
to 2 inches (38 to 51 mm)
deep. Clean the dust and
debris from the hole with a brush or air pump.
Important:
When drilling into masonry,
avoid drilling into mortar joints.
4. Place the rack over the holes,
and use a hammer to tap the
sleeve anchors through the
keyholes and into the wall.
5. Use a 10 mm wrench to tighten the
sleeve anchor nuts until secure.
2 in.
3/8 in.
