manualshive.com logo in svg

AUMA SQEx 05.2, Руководство по эксплуатации, Страница: 44 / 92

Поделиться
Скачать
AUMA SQEx 05.2 Скачать руководство пользователя страница 44

Characteristics

●

Independent of power supply

●

Used as running indication: Indicator disc (with arrow 

) rotates during actu-

ator operation and continuously indicates the valve position
(For “clockwise closing version”, the arrow rotates in clockwise direction for
operation in direction CLOSE)

●

Indicates that end positions (OPEN/CLOSED) have been reached

Arrow 

 points to symbol 

 (OPEN) or 

 (CLOSED)

●

Self-adjusting when increasing the swing angle

7.5.

Mechanical position indication via indicator mark

Figure 55: Mechanical position indicator

[1]

End position OPEN reached

[2]

End position CLOSED reached

[3]

Indicator mark at cover

Characteristics

●

Independent of power supply

●

Used as running indication: Indicator disc rotates during actuator operation and
continuously indicates the valve position

(For “clockwise closing version”, the symbols 

/

 rotate in counterclockwise

direction for operation in direction CLOSE)

●

Indicates that end positions (OPEN/CLOSED) have been reached

(Symbols 

 (OPEN)/ 

 (CLOSED) point to the indicator mark   at cover)

44

 SQEx 05.2 – SQEx 14.2 / SQREx 05.2 – SQREx 14.2 Control unit: electronic (MWG)

Indications

 ACExC 01.2 Non-Intrusive Modbus TCP/IP

Содержание SQEx 05.2





























































































Отзывы:

Нет отзывов