AUMA SQ 05.2-F05 Скачать руководство пользователя

Страница: 20 / 72

5.2.3.

Terminal compartment: close

Figure 13: Example: Version S

[1]

Cover

[2]

Screws for cover

[3]

O-ring

[4]

Screws for socket carrier

[5]

Socket carrier

[6]

Cable entry

[7]

Blanking plug

[8]

Cable gland (not included in delivery)

Short-circuit due to pinching of cables!

Risk of electric shock and functional failures.

→

Carefully fit socket carrier to avoid pinching the cables.

Insert the socket carrier [5] into the cover [1] and fasten with screws [4].

Clean sealing faces of cover [1] and housing.

Check whether O-ring [3] is in good condition, replace if damaged.

Apply a thin film of non-acidic grease (e.g. petroleum jelly) to the O-ring and
insert it correctly.

Fit cover [1] and fasten screws [2] evenly crosswise.

Fasten cable glands [8] applying the specified torque to ensure the required
enclosure protection.

5.3.

Accessories for electrical connection

— Option —

5.3.1.

Controls mounted to wall bracket

The wall bracket allows separate mounting of controls and actuator.

Application

●

If the actuator cannot be accessed.

●

If the actuator is subjected to high temperatures.

●

In case of heavy vibration of the valve.

SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2 Control unit: electronic (MWG)

Electrical connection

AC 01.2 Non-Intrusive

Содержание SQ 05.2-F05









































































Результаты поиска

Содержание SQ 05.2-F05

Отзывы:

Похожие инструкции для SQ 05.2-F05

Бренды по названию

Популярные бренды

AUMA SQ 05.2-F05, Руководство пользователя

Результаты поиска

Содержание SQ 05.2-F05

Отзывы:

Похожие инструкции для SQ 05.2-F05

Бренды по названию

Популярные бренды