AUMA SARVEx 07.2 Скачать руководство пользователя страница 42

Страница: 42 / 100

6.5.3.

Terminal compartment: close

Figure 39: Close terminal compartment

[1]

Cover (illustration shows type of protection Ex e)

[2]

Screws for cover

[3]

O-ring

[4]

Blanking plugs

[5]

Cable gland (example)

[6]

Connection frame

Clean sealing faces of cover [1] and connection frame [6].

For Ex plug/socket connector designed as KES flameproof: Preserve joint sur-
faces with an acid-free corrosion protection agent.

Check whether O-ring [3] is in good condition, replace if damaged.

Apply a thin film of non-acidic grease to the O-ring and insert it correctly.

Flameproof enclosure, danger of explosion!

Risk of death or serious injury.

→

Handle cover and housing parts with care.

→

Joint surfaces must not be damaged or soiled in any way.

→

Do not jam cover during fitting.

Fit cover [1] and fasten screws [2] evenly crosswise.

6.6.

External earth connection

Figure 40: Earth connection for multi-turn actuator

Application

External earth connection (U-bracket) for connection to equipotential compensation.

SAVEx 07.2 – SAVEx16.2/SARVEx 07.2 – SARVEx16.2 Control unit: electronic (MWG)

Electrical connection

ACVExC 01.2 Non-Intrusive

Содержание SARVEx 07.2





































































































Результаты поиска

Содержание SARVEx 07.2

Отзывы:

Бренды по названию

Популярные бренды

AUMA SARVEx 07.2, Руководство по эксплуатации

Результаты поиска

Содержание SARVEx 07.2

Отзывы:

Бренды по названию

Популярные бренды