manualshive.com logo in svg

AUMA SARVEx 07.2, Руководство по эксплуатации

Поделиться
Скачать
AUMA SARVEx 07.2 Скачать руководство пользователя страница 16

Long-term storage

For long-term storage (more than 6 months), observe the following points:

1.

Prior to storage:
Protect uncoated surfaces, in particular the output drive parts and mounting
surface, with long-term corrosion protection agent.

2.

At an interval of approx. 6 months:
Check for corrosion. If first signs of corrosion show, apply new corrosion protec-
tion.

4.3.

Verpackung

Our products are protected by special packaging for transport when leaving the
factory. The packaging consists of environmentally friendly materials which can easily
be separated and recycled. We use the following packaging materials: wood,
cardboard, paper, and PE foil. For the disposal of the packaging material, we
recommend recycling and collection centres.

16

SAVEx 07.2 – SAVEx16.2/SARVEx 07.2 – SARVEx16.2 Control unit: electronic (MWG)

Transport, Lagerung und Verpackung

ACVExC 01.2 Non-Intrusive

Содержание SARVEx 07.2





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды