4.
While LED is flashing in blue, hold down push button
for at least two seconds
until the LED is illuminated in red.
Figure 20: Example with I/O interface
➥
The end position CLOSED setting has been successfully completed.
7.2.2.
Set end position OPEN
Electric shock due to presence of hazardous voltage!
Failure to observe this warning results in death or serious injury.
→
Electrical connection and commissioning must be carried out exclusively by
suitably qualified personnel if circuit is live.
→
Do not touch any cables.
1.
Remove cover from actuator.
27
PF-Q80 – PF-Q600
Commissioning
