manualshive.com logo in svg

AUMA PROFOX PF-M100, Руководство по эксплуатации

Поделиться
Скачать
AUMA PROFOX PF-M100 Скачать руководство пользователя страница 25

7.1.2.

End position OPEN: set

Electric shock due to presence of hazardous voltage!

Failure to observe this warning results in death or serious injury.

→

Electrical connection and commissioning must be carried out exclusively by
suitably qualified personnel if circuit is live.

→

Do not touch any cables.

1.

Remove cover from actuator.

2.

Operate in direction OPEN via push button   until complete valve opening.

➥

The operation in direction OPEN is signalled by the LED flashing in green.

3.

Once the desired end position OPEN has been reached, release the push button

.

➥

The LED continues flashing in blue for approx. 10 seconds. This time span al-

lows for end position setting.

4.

While LED is flashing in blue, hold down push button 

 for at least two seconds

until the LED is illuminated in green.

➥

The end position OPEN setting has been successfully completed.

25

PROFOX / PF-M25 – PF-M100 
Profibus DP 

Commissioning

Содержание PROFOX PF-M100

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды