AUMA A 25.2 Скачать руководство пользователя страница 22

Страница: 22 / 112

Place multi-turn actuator [1] and ensure that the spigot fits uniformly in the recess
and that the mounting faces are in complete contact.

Fasten multi-turn actuator with screws according to table.

Information: We recommend applying liquid thread sealing material to the
screws to avoid contact corrosion.

Fasten screws crosswise to a torque according to table.

Table 10:

Tightening torques for screws

Tightening torque [Nm]

Threads

Strength class

A2-80

8.8

200

214

M16

392

431

M20

1,422

1,489

M30

2,481

2,594

M36

4.4.

Accessories for assembly

4.4.1.

Stem protection tube for rising valve stem

Figure 19: Assembly of the stem protection tube

[1]

Protective cap for stem protection tube (fitted)

[1]*

Option for size 25.1: Protective cap made of steel (screwed)

[1]**

Option from size 30.1: Protective cap made of steel (welded)

[2]

Stem protection tube

[3]

V-seal

Procedure

Seal all threads with hemp, Teflon tape, or thread sealing material.

SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1

Assembly

ACExC 01.2

Содержание A 25.2

















































































































Результаты поиска

Содержание A 25.2

Отзывы:

AUMA A 25.2, Руководство по эксплуатации, Страница: 22 / 112

Результаты поиска

Содержание A 25.2

Отзывы: