manualshive.com logo in svg

AUMA A 25.2, Руководство по эксплуатации, Страница: 20 / 112

Поделиться
Скачать
AUMA A 25.2 Скачать руководство пользователя страница 20

4.3.1.2. Multi-turn actuator with output drive type A: mount

Figure 16: Assembly of output drive type A

[1]

Valve stem

[2]

Output drive type A

[3]

Screws to actuator

[4]

Valve flange

[5]

Screws to output drive

Procedure

1.

If output drive type A is already mounted to the multi-turn actuator: Loosen
screws [3] and remove output drive type A [2].

2.

Apply a small quantity of grease to the valve stem [1].

3.

Place output drive type A on valve stem and turn until it is flush on the valve
flange.

4.

Turn output drive type A until alignment of the fixing holes.

5.

Fasten screws [5] between valve and output drive type A without completely
tightening them.

6.

Fit multi-turn actuator on the valve stem so that the stem nut dogs engage into
the output drive sleeve.

➥

The flanges are flush with each other if properly engaged.

7.

Adjust multi-turn actuator until alignment of the fixing holes.

8.

Fasten multi-turn actuator with screws [3].

9.

Fasten screws [3] crosswise with a torque according to table.

Table 9:

Tightening torques for screws

Tightening torque [Nm]

Threads

Strength class

A2-80

8.8

200

214

M16

392

431

M20

1,422

1,489

M30

2,481

2,594

M36

10. Turn multi-turn actuator with handwheel in direction OPEN until valve flange

and output drive type A are firmly placed together.

11. Tighten screws [5] between valve and output drive type A crosswise applying

a torque according to table.

20

 SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1

Assembly

 ACExC 01.2

Содержание A 25.2

















































































































Отзывы:

Нет отзывов